TE-ID 7501 E

TE ID 7501 EMains supply 220-240 V | 50-60 Hz
Power 750 W
Number of gears 1
Idle speed (gear 1) 0-2700 min^-1
Impact rate (gear 1) 0-43200 min^-1
Drill chuck 1.5 mm - 13 mm
Drilling capacity in wood 30 mm
Drilling capacity in metal 12 mm
Drilling capacity in concrete 14 mm

View all
Frezat
Lemuesit vibrues
Mikserat
Retifikues (shllajferice)
Sharrat
Shpojset elektrike
Shpojset me bateri
Shpojset me çekan
View all
  • TE-MX 1600...

    Mains supply    220-240 V | 50 Hz Power    1600 W Idle speed (gear 1)    0-460 min^-1 Idle speed (gear 2)    0-750 min^-1 

  • TC-MX 1400...

    Mains supply    230 V | 50 Hz Power    1400 W Idle speed (gear 1)    0-750 min^-1 

  • TC-MX 1100...

    Mains supply    230 V | 50 Hz Power    1050 W Idle speed (gear 1)    0-550 min^-1 

  • BT-MX 1400...

    Mains supply    230 V | 50 Hz Power    1400 W Idle speed (gear 1)    180-460 min^-1 Idle speed (gear 2)    300-700 min^-1 

  • BT-MX 1100...

    Mains supply    230 V | 50 Hz Power    1050 W Idle speed (gear 1)    0-550 min^-1 

  • TH-MA 1300...

    Mains supply    230 V | 50 Hz Power    1320 W Idle speed    9000 min^-1 Cutting disc    125 mm x 22.2 mm Groove depth    8 mm - 30 mm Groove width    8 mm - 26 mm 

  • TC-RO 1155...

    Mains supply    230-240 V | 50 Hz Power    1100 W Idle speed    11000 min^-1 - 30000 min^-1 Stroke height    55 mm Moulding cutter max.    30 mm Clamping device    6 + 8 mm 

  • TC-BJ 900....

    Mains supply    230 V | 50 Hz Power    860 W Idle speed    11000 min^-1 Groove cutter    100 mm x 22 mm x 3.8 mm Max. router depth    14 mm Tilt angle adjustment    90 ° 

  • RT-RO 55.J...

    Mains supply    230 V | 50 Hz Power    1200 W Idle speed    11000 min^-1 - 30000 min^-1 Stroke height    55 mm Clamping device    6 + 8 mm Moulding cutter max.    30 mm

  • BT-RO 1100...

    Mains supply    230-240 V | 50 Hz Power    1100 W Idle speed    11000 min^-1 - 30000 min^-1 Stroke height    55 mm Collets    6 + 8 mm 

  • BT-MA 1300...

    Mains supply    230 V | 50 Hz Power    1320 W Idle speed    9000 min^-1 Cutting disc    125 mm x 22.2 mm Groove depth    8 mm - 30 mm Groove width    8 mm - 26 mm 

  • TC-BS 8038..

    Mains supply    230 V | 50 Hz Power    800 W Idle speed    380 m/min Sanding belt    76 mm x 533 mm Sanding area    76x142 mm 

  • RT-XS 28.J...

    Mains supply    230 V | 50 Hz Power    280 W Oscillating speed    0-10000 min^-1 Oscillating circuit    2 mm Eccentric sanding area    125 mm Orbital sanding area    140 mm x 115 mm Delta sanding area    174 mm x 174 mm x 105 mm

  • RT-OS 30.J...

    Mains supply    230 V | 50 Hz Power    300 W Oscillating speed    14000 - 22000 min^-1 Oscillating circuit    2 mm Sandpaper size (clamp connection)    280 mm x 115 mm Sandpaper size (velcro strip)    230 mm x 115 mm

  • RT-OS 13 K...

    Mains supply    230 V | 50 Hz Power    130 W Oscillating speed    24000 min^-1 Oscillating circuit    2 mm Delta sanding area    150 mm x 150 mm x 100 mm 

  • BT-RS 420...

    Mains supply    230 V | 50 Hz Power    420 W Oscillating speed    6000 - 13000 min^-1 Oscillating circuit    2 mm Grinding disc diameter    125 mm 

  • BT-OS 280...

    Mains supply    230 V | 50 Hz Power    280 W Oscillating speed    0-12000 min^-1 Oscillating circuit    2 mm Sanding area    227 x 115 mm Sandpaper size (clamp connection)    280 mm x 115 mm Sandpaper size (velcro strip)    230 mm x 115 mm 

  • BT-OS 150....

    Mains supply    230 V | 50 Hz Power    150 W Oscillating speed    23000 min^-1 Oscillating circuit    2 mm Sanding area    90 x 187 mm Sandpaper size (clamp connection)    230 mm x 93 mm 

  • BT-MG 1351...

    Mains supply    230 V | 50 Hz Power    135 W Idle speed    10000 min^-1 - 35000 min^-1 

  • BT-DS 180....

    Mains supply    230 V | 50 Hz Power    180 W Oscillating speed    20000 min^-1 Oscillating circuit    1.2 mm Sandpaper size    90 mm x 90 mm x 90 mm 

  • BT-BS 8501...

      Mains supply    230 V | 50 Hz Power    850 W Idle speed    0 m/min - 380 m/min Sanding belt    76 mm x 533 mm Sanding area    76x142 mm

  • TC-AG 125....

    Mains supply    230 V | 50 Hz Power    850 W Idle speed    11000 min^-1 Disc diameter    125 mm 

  • TC-AG 115....

    Mains supply    230 V | 50 Hz Power    500 W Idle speed    12000 min^-1 Disc diameter    115 mm 

  • RT-AG 230....

    Mains supply    230 V | 50 Hz Power    2300 W Idle speed    6600 min^-1 Disc diameter    230 mm 

  • RT-AG 1251...

    Mains supply    230 V | 50 Hz Power    1010 W Idle speed    12000 min^-1 Disc diameter    125 mm 

  • RT-AG 115....

    Mains supply    230 V | 50 Hz Power    600 W Idle speed    12000 min^-1 Disc diameter    115 mm 

  • BT-AG 850....

    Mains supply    230 V | 50 Hz Power    850 W Idle speed    11000 min^-1 Disc diameter    125 mm 

  • BT-AG 500...

    Mains supply    230 V | 50 Hz Power    500 W Idle speed    11000 min^-1 Disc diameter    115 mm 

  • BT-AG 2350...

    Mains supply    230 V | 50 Hz Power    2350 W Idle speed    6000 min^-1 Disc diameter    230 mm 

  • BT-AG 2000...

    Mains supply    230 V | 50 Hz Power    2000 W Idle speed    6000 min^-1 Disc diameter    230 mm 

  • BT-AG 1000...

    Mains supply    230 V | 50 Hz Power    1010 W Idle speed    11000 min^-1 Disc diameter    125 mm 

  • TH-JS 85

    Mains supply 230 V | 50 HzPower 620 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 85 mmCutting depth in plastic 12 mmCutting depth in steel 8 mmMax. bevel cuts 45 °

  • TH-CS 12001

    Mains supply 230 V | 50 HzPower 1230 WIdle speed 5000 min^-1Saw blade 160 mm x 16 mmNumber of saw teeth 24 PiecesCutting depth at 45° 37 mmCutting depth at 90° 55 mm

  • TE-XC 1101

    Mains supply 230 V | 50 HzPower 730 WIdle speed 4300 min^-1Saw blade 110 mm x 22.2 mmNumber of saw teeth 24 PiecesDiamond cutting disc 110 mm x 22.2 mmCutting depth at 90° 33 mm

  • TE-JS 100

    Mains supply 230 V | 50 HzPower 750 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 23 mmCutting depth in wood 100 mmCutting depth in plastic 12 mmCutting depth in steel 10 mmMax. bevel cuts 45 °

  • TE-JS 18 Li - Solo

    Number of strokes 2400 min^-1Stroke height 25.4 mmCutting depth in wood 80 mmCutting depth in plastic 12 mmCutting depth in steel 10 mmMax. bevel cuts 47 °Toolless saw blade change yes

  • TE-CS 190

    Mains supply 230 V | 50 HzPower 1500 WIdle speed 5500 min^-1Saw blade 190 mm x 30 mmNumber of saw teeth 24 PiecesCutting depth at 45° 48 mmCutting depth at 90° 66 mm

  • TE-CS 165

    Mains supply 230 V | 50 HzPower 1200 WIdle speed 5500 min^-1Saw blade 165 mm x 16 mmNumber of saw teeth 24 PiecesCutting depth at 45° 40 mmCutting depth at 90° 55 mm

  • TE-AP 1050 E

    Mains supply 230 V | 50 HzPower 1050 WNumber of strokes 0 min^-1 - 2700 min^-1Stroke height 29 mmCutting depth in wood 200 mmCutting depth in steel 20 mm

  • TE-AP 18 Li - Solo

    Number of strokes 0 min^-1 - 2600 min^-1Stroke height 22 mmCutting depth in wood 100 mmCutting depth in steel 6 mmToolless saw blade change yes

  • TC-JS 80

    Mains supply 230 V | 50 HzPower 600 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 18 mmCutting depth in wood 80 mmCutting depth in plastic 20 mmCutting depth in steel 10 mmMax. bevel cuts 45 °

  • TC-JS 60

    Mains supply 230 V | 50 HzPower 410 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 18 mmCutting depth in wood 60 mmCutting depth in plastic 10 mmCutting depth in steel 6 mmMax. bevel cuts 45 °

  • TC-CS 1400

    Mains supply 230 V | 50 HzPower 1400 WIdle speed 5200 min^-1Saw blade 190 mm x 30 mmNumber of saw teeth 24 PiecesCutting depth at 45° 45 mmCutting depth at 90° 66 mm

  • TC-CS 860 Kit

    Mains supply 230-240 V | 50 HzPower 450 WIdle speed 6000 min^-1Saw blade bore 10 mmCutting depth 23 mm

  • TC-AP 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 150 mmCutting depth in steel 10 mm

  • RT-JS 85

    Mains supply 230 V | 50 HzPower 750 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 23 mmCutting depth in wood 85 mmCutting depth in plastic 12 mmCutting depth in steel 8 mmMax. bevel cuts 45 °

  • BT-JS 800 E

    Mains supply 230 V | 50 HzPower 800 WNumber of strokes 0 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 80 mmCutting depth in plastic 25 mmCutting depth in steel 10 mmMax. bevel cuts 45 °

  • TC-AP 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 150 mmCutting depth in steel 10 mm

  • RT-JS 85

    Mains supply 230 V | 50 HzPower 750 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 23 mmCutting depth in wood 85 mmCutting depth in plastic 12 mmCutting depth in steel 8 mmMax. bevel cuts 45 °

  • TC-AP 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 150 mmCutting depth in steel 10 mm

  • RT-JS 85

    Mains supply 230 V | 50 HzPower 750 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 23 mmCutting depth in wood 85 mmCutting depth in plastic 12 mmCutting depth in steel 8 mmMax. bevel cuts 45 °

  • BT-JS 800 E

    Mains supply 230 V | 50 HzPower 800 WNumber of strokes 0 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 80 mmCutting depth in plastic 25 mmCutting depth in steel 10 mmMax. bevel cuts 45 °

  • TC-AP 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 150 mmCutting depth in steel 10 mm

  • RT-JS 85

    Mains supply 230 V | 50 HzPower 750 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 23 mmCutting depth in wood 85 mmCutting depth in plastic 12 mmCutting depth in steel 8 mmMax. bevel cuts 45 °

  • BT-JS 800 E

    Mains supply 230 V | 50 HzPower 800 WNumber of strokes 0 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 80 mmCutting depth in plastic 25 mmCutting depth in steel 10 mmMax. bevel cuts 45 °

  • BT-JS 650 E

    Mains supply 230 V | 50 HzPower 650 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 18 mmCutting depth in wood 80 mmCutting depth in plastic 20 mmCutting depth in steel 10 mmMax. bevel cuts 45 °

  • BT-JS 400 E

    Mains supply 230 V | 50 HzPower 400 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 18 mmCutting depth in wood 55 mmCutting depth in plastic 10 mmCutting depth in steel 6 mmMax. bevel cuts 45 °

  • BT-CS 14001

    Mains supply 230 V | 50 HzPower 1400 WIdle speed 5200 min^-1Saw blade 190 mm x 30 mmNumber of saw teeth 24 PiecesCutting depth at 45° 45 mmCutting depth at 90° 66 mm

  • BT-CS 12001

    Mains supply 230 V | 50 HzPower 1200 WIdle speed 5000 min^-1Saw blade 160 mm x 16 mmNumber of saw teeth 24 PiecesCutting depth at 45° 37 mmCutting depth at 90° 55 mm

  • BT-CS 860 Kit

    Mains supply 230-240 V | 50 HzPower 450 WIdle speed 6000 min^-1Saw blade bore 10 mmCutting depth 2.3 cm

  • BT-AP 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 150 mmCutting depth in steel 10 mm

  • TH-RH 9001

    Mains supply 220-240 V | 50 HzPower 900 WIdle speed 850 min^-1Impact rate 4100 min^-1Impact power 3 JTool holder SDS plusDrilling capacity in concrete 26 mm

  • TH-RH 1600

    Mains supply 230-240 V | 50 HzPower 1600 WIdle speed 800 min^-1Impact rate 3900 min^-1Impact power 4 JTool holder SDS plusDrilling capacity in concrete 32 mm

  • TE-RH 38 E

    Mains supply 220-240 V | 50 HzPower 1050 WIdle speed 0-500 min^-1Impact rate 0-4100 min^-1Impact power 9 JTool holder SDS MaxDrilling capacity in concrete 38 mm

  • TE-RH 32 E

    Mains supply 230 V | 50 HzPower 1250 WIdle speed 0-850 min^-1Impact rate 0-4100 min^-1Impact power 5 JTool holder SDS plusDrilling capacity in concrete 32 mm

  • TE-HD 18 Li Kit

    Accumulator 18 V | 1500 mAh | Li-IonCharging time 1/2hIdle speed (gear 1) 0-1100 min^-1Impact rate (gear 1) 0-5700 min^-1Impact power 1.2 JMax. torque hard 9.9 NmDrilling capacity in concrete 12 mm

  • TE-HD 18 Li - Solo

    Accumulator 18 V | 1500 mAh | Li-IonCharging time 1/2hIdle speed (gear 1) 0-1100 min^-1Impact rate (gear 1) 0-5700 min^-1Impact power 1.2 JMax. torque hard 9.9 NmDrilling capacity in concrete 12 mm

  • TE-DH 1027

    Mains supply 230-240 V | 50 HzPower 1500 WImpact rate 1900 min^-1Impact power 32 JPower cord 400 cm | H07RN-FTool holder SDS Max

  • TC-RH 900 Kit

    Mains supply 220-240 V | 50 HzPower 900 WIdle speed 850 min^-1Impact rate 4100 min^-1Impact power 3 JTool holder SDS plusDrilling capacity in concrete 26 mm

  • TC-RH 800 E

    Mains supply 230-240 V | 50 HzPower 800 WIdle speed 0-1000 min^-1Impact rate 0-5180 min^-1Impact power 2.5 JTool holder SDS plusDrilling capacity in concrete 26 mm

  • RT-RH 201

    Mains supply 220-240 V | 50 HzPower 500 WIdle speed 0-1200 min^-1Impact rate 0-5800 min^-1Impact power 1.6 JTool holder SDS plusDrilling capacity in concrete 20 mm

  • RT-RH 32

    Mains supply 230 V | 50 HzPower 1250 WIdle speed 800 min^-1Impact rate 4300 min^-1Impact power 3.5 JTool holder SDS plusDrilling capacity in concrete 32 mm

  • RT-RH 32 Kit

    Mains supply 230 V | 50 HzPower 1250 WIdle speed 800 min^-1Impact rate 4300 min^-1Impact power 3.5 JTool holder SDS plusDrilling capacity in concrete 32 mm

  • RT-RH 20

    Length 380 mmWidth 118 mmHeight 365 mmGross weight single packaging 4.5 kgProduct weight 2.8 kg

  • BT-RH 9001

    Mains supply 220-240 V | 50 HzPower 900 WIdle speed 850 min^-1Impact rate 4100 min^-1Impact power 3 JTool holder SDS plusDrilling capacity in concrete 26 mm

  • BT-RH 1600

    Mains supply 230-240 V | 50 HzPower 1600 WIdle speed 800 min^-1Impact rate 3900 min^-1Impact power 4 JTool holder SDS plusDrilling capacity in concrete 32 mm

  • BT-RH 1500

    Mains supply 230 V | 50 HzPower 1500 WIdle speed 800 min^-1Impact rate 3900 min^-1Impact power 4 JTool holder SDS plusDrilling capacity in concrete 32 mm

  • BT-DH 16001

    Mains supply 230 V | 50 HzPower 1600 WImpact rate 1800 min^-1Impact power 43 JPower cord 300 cm | H07RN-FTool holder SDS-HEX 30 mm

  • TH-CD 24-2 i

    Accumulator 24 V | 1200 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 48 NmNumber of torque steps 20 settingsDrill chuck 13 mm | double sleeveDrilling capacity in concrete 10 m

  • TH-CD 18-2

    Accumulator 18 V | 1200 mAh | NiCdCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 30 NmNumber of torque steps 20 settingsDrill chuck 10 mm | double sleeve

  • TH-CD 18-2 Li

    Accumulator 18 V | 1300 mAh | Li-IonCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1150 min^-1Max. torque hard 40 NmNumber of torque steps 20 settingsDrill chuck 10 mm | single sleeve

  • TH-CD 14,4-2 2B Li

    Accumulator 14.4 V | 1300 mAh | Li-IonCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1150 min^-1Max. torque hard 33 NmNumber of torque steps 20 settingsDrill chuck 10 mm | single sleeve

  • TH-CD 12

    Accumulator 12 V | 1100 mAh | NiCdCharging time 3-5hNumber of gears 1Idle speed (gear 1) 0-550 min^-1Max. torque hard 12 NmNumber of torque steps 20 settingsDrill chuck 10 mm | double sleeve

  • TH-CD 12-2 Li Kit

    Accumulator 12 V | 1300 mAh | Li-IonCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1300 min^-1Max. torque hard 24 NmNumber of torque steps 20 settingsDrill chuck 10 mm | single sleeve

  • TH-CD 12-2 Li

    Accumulator 12 V | 1300 mAh | Li-IonCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1300 min^-1Max. torque hard 24 NmNumber of torque steps 20 settingsDrill chuck 10 mm | single sleeve

  • TE-SD 3,6 Li Kit

    Accumulator 3.6 V | 1500 mAh | Li-IonCharging time 3hIdle speed 200 min^-1Max. torque hard 3.5 NmNumber of torque steps 7 settingsTool holder Bit holder (6,35mm/¼") | Mechanic locking sleeve

  • TC-SD 3,6 Li

    Accumulator 3.6 V | 1300 mAh | Li-IonCharging time 3-5hIdle speed 200 min^-1Max. torque hard 3 NmTool holder Bit holder (6,35mm/¼") | Magnetic

  • TC-CD 18-2 Li (2x1,3 Ah)

    Accumulator 18 V | 1300 mAh | Li-IonCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1250 min^-1Max. torque hard 38 NmNumber of torque steps 19 settingsDrill chuck 10 mm | single sleeve

  • TC-CD 18-2 i

    Accumulator 18 V | 1200 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 0-300 min^-1Idle speed (gear 2) 0-900 min^-1Max. torque hard 30 NmNumber of torque steps 21 settingsDrill chuck 13 mm | double sleeveDrilling capacity in concrete 8 mm

  • TC-CD 18-2 2B

    Accumulator 18 V | 1200 mAh | NiCdCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 30 NmNumber of torque steps 20 settingsDrill chuck 10 mm | double sleeve

  • TC-CD 18-2 1h

    Accumulator 18 V | 1200 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 30 NmNumber of torque steps 20 settingsDrill chuck 10 mm | double sleeve

  • TC-CD 14,4 2B

    Accumulator 14.4 V | 1200 mAh | NiCdCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 24 NmNumber of torque steps 20 settingsDrill chuck 10 mm | double sleeve

  • TC-CD 12-2

    Accumulator 12 V | 1100 mAh | NiCdCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 14 NmNumber of torque steps 20 settingsDrill chuck 10 mm | double sleeve

  • TC-CD 12 Li

    Accumulator 12 V | 1.3 Ah | Li-IonCharging time 1hNumber of gears 2Idle speed (gear 1) 0-300 min^-1Idle speed (gear 2) 0-1050 min^-1Max. torque hard 20 NmNumber of torque steps 18 settingsDrill chuck 10 mm | single sleeve

  • RT-CD 181

    Accumulator 18 V | 1500 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 0-320 min^-1Idle speed (gear 2) 0-1350 min^-1Max. torque hard 44 NmNumber of torque steps 24 settingsDrill chuck 10 mm | single sleeve

  • RT-CD 14,41

    Accumulator 14.4 V | 1500 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 0-310 min^-1Idle speed (gear 2) 0-1300 min^-1Max. torque hard 36 NmNumber of torque steps 24 settingsDrill chuck 10 mm | single sleeve

  • RT-CD 14,41 Li

    Accumulator 14.4 V | 1300 mAh | Li-IonCharging time 1hNumber of gears 2Idle speed (gear 1) 0-310 min^-1Idle speed (gear 2) 0-1300 min^-1Max. torque hard 38 NmNumber of torque steps 24 settingsDrill chuck 10 mm | single sleeve

  • BT-SD 4,8 F

    Accumulator 4.8 V | 600 mAh | NiCdCharging time 3-5hIdle speed 200 min^-1Tool holder Bit holder (6,35mm/¼") | Magnetic

  • BT-SD 3,61 Li

    Accumulator 3.6 V | 1300 mAh | Li-IonCharging time 3-5hIdle speed 200 min^-1Max. torque hard 3 NmNumber of torque steps 9 settingsTool holder Bit holder (6,35mm/¼") | Mechanic locking sleeve

  • BT-CD 241 i

    Accumulator 24 V | 1200 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 48 NmNumber of torque steps 20 settingsDrill chuck 13 mm | double sleeveDrilling capacity in concrete 10 mm

  • BT-CD 18

    Accumulator 18 V | 1300 mAh | NiCdCharging time 3-5hNumber of gears 1Idle speed (gear 1) 0-550 min^-1Max. torque hard 9 NmNumber of torque steps 22 settingsDrill chuck 10 mm | double sleeve

  • BT-CD 18 2B

    Accumulator 18 V | 1300 mAh | NiCdCharging time 3-5hNumber of gears 1Idle speed (gear 1) 0-550 min^-1Max. torque hard 9 NmNumber of torque steps 22 settingsDrill chuck 10 mm | double sleeve

  • BT-CD 18 1h

    Accumulator 18 V | 1300 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 350 min^-1Idle speed (gear 2) 1100 min^-1Max. torque hard 9 NmNumber of torque steps 22 settingsDrill chuck 10 mm | double sleeve

  • BT-CD 14,4 2B

    Accumulator 14.4 V | 1300 mAh | NiCdCharging time 3-5hNumber of gears 1Idle speed (gear 1) 0-550 min^-1Max. torque hard 7.5 NmNumber of torque steps 22 settingsDrill chuck 10 mm | double sleeve

  • BT-CD 10,83 Li

    Accumulator 10.8 V | 1300 mAh | Li-IonCharging time 3-5hNumber of gears 2Idle speed (gear 1) 350 min^-1Idle speed (gear 2) 1200 min^-1Max. torque hard 14 NmNumber of torque steps 20 settingsDrill chuck 10 mm | single sleeve

  • BT-CD 10,81 Li Kit

    DC voltage 10.8 VAccumulator 10.8 V | 1400 mAh | Li-IonCharging time 3-5hNumber of gears 1Idle speed (gear 1) 0-600 min^-1Number of torque steps 16 settingsDrill chuck 10 mm | single sleeve

  • TH-ID 7201 E

    Mains supply 230-240 V | 50 HzPower 720 WNumber of gears 1Idle speed (gear 1) 0-2700 min^-1Impact rate (gear 1) 0-43200 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 30 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • TH-ID 1000 Kit

    Mains supply 230 V | 50 HzPower 1010 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 32 mmmDrilling capacity in metal 13 mmmDrilling capacity in concrete 16 mm

  • TH-ID 1000 E

    Mains supply 230 V | 50 HzPower 1010 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 32 mmmDrilling capacity in metal 13 mmmDrilling capacity in concrete 16 mm

  • TH-ID 1000 E

    Mains supply 230 V | 50 HzPower 1010 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 32 mmmDrilling capacity in metal 13 mmmDrilling capacity in concrete 16 mm

  • TE-ID 10501 CE

    Mains supply 230 V | 50 HzPower 1050 WNumber of gears 2Idle speed (gear 1) 0-1000 min^-1Idle speed (gear 2) 0-2800 min^-1Impact rate (gear 1) 0-15000 min^-1Impact rate (gear 2) 0-42000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 40 mmmDrilling capacity in metal 13 mmmDrilling capacity in concrete 16 mm

  • TE-ID 7501 E

    Mains supply 220-240 V | 50-60 HzPower 750 WNumber of gears 1Idle speed (gear 1) 0-2700 min^-1Impact rate (gear 1) 0-43200 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 30 mmDrilling capacity in metal 12 mmDrilling capacity in concrete 14 mm

  • TE-ID 1050 CE

    Mains supply 230 V | 50 HzPower 1050 WNumber of gears 2Idle speed (gear 1) 0-1000 min^-1Idle speed (gear 2) 0-2800 min^-1Impact rate (gear 1) 0-15000 min^-1Impact rate (gear 2) 0-42000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 40 mmmDrilling capacity in metal 13 mmmDrilling capacity in concrete 16 mm

  • TE-ID 750 E

    Mains supply 220-240 V | 50-60 HzPower 750 WNumber of gears 1Idle speed (gear 1) 0-2700 min^-1Impact rate (gear 1) 0-43200 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 30 mmDrilling capacity in metal 12 mmDrilling capacity in concrete 14 mm 

  • TE-ID 500 E

    Mains supply 220-240 V | 50/60 HzPower 550 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmDrilling capacity in metal 8 mmDrilling capacity in concrete 10 mm

  • TC-ID 710 E

    Mains supply 230 V | 50 HzPower 710 WNumber of gears 1Idle speed (gear 1) 0-2700 min^-1Impact rate (gear 1) 0 - 43200 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • TC-ID 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • TC-ID 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • TC-ID 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • RT-ID 651

    Mains supply 230-240 V | 50 HzPower 650 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • BT-ID 1000 E

    Mains supply 230 V | 50 HzPower 1010 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 48000 min^-1Drill chuck 0 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • BT-ID 550 E

    Mains supply 230-240 V | 50 HzPower 720 WNumber of gears 1Idle speed (gear 1) 2700 min^-1Impact rate (gear 1) 43200 min^-1Drill chuck 0 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • Veglat

    Mains supply 230 V | 50 HzPower 550 WNumber of gears 1Idle speed (gear 1) 0-2700 min^-1Impact rate (gear 1) 43200 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm