TC-CD 12-2

TC CD 12 2Accumulator 12 V | 1100 mAh | NiCd
Charging time 3-5h
Number of gears 2
Idle speed (gear 1) 0-350 min^-1
Idle speed (gear 2) 0-1100 min^-1
Max. torque hard 14 Nm
Number of torque steps 20 settings
Drill chuck 10 mm | double sleeve

View all
Frezat
Lemuesit vibrues
Mikserat
Retifikues (shllajferice)
Sharrat
Shpojset elektrike
Shpojset me bateri
Shpojset me çekan
View all
  • TE-MX 1600...

    Mains supply    220-240 V | 50 Hz Power    1600 W Idle speed (gear 1)    0-460 min^-1 Idle speed (gear 2)    0-750 min^-1 

  • TC-MX 1400...

    Mains supply    230 V | 50 Hz Power    1400 W Idle speed (gear 1)    0-750 min^-1 

  • TC-MX 1100...

    Mains supply    230 V | 50 Hz Power    1050 W Idle speed (gear 1)    0-550 min^-1 

  • BT-MX 1400...

    Mains supply    230 V | 50 Hz Power    1400 W Idle speed (gear 1)    180-460 min^-1 Idle speed (gear 2)    300-700 min^-1 

  • BT-MX 1100...

    Mains supply    230 V | 50 Hz Power    1050 W Idle speed (gear 1)    0-550 min^-1 

  • TH-MA 1300...

    Mains supply    230 V | 50 Hz Power    1320 W Idle speed    9000 min^-1 Cutting disc    125 mm x 22.2 mm Groove depth    8 mm - 30 mm Groove width    8 mm - 26 mm 

  • TC-RO 1155...

    Mains supply    230-240 V | 50 Hz Power    1100 W Idle speed    11000 min^-1 - 30000 min^-1 Stroke height    55 mm Moulding cutter max.    30 mm Clamping device    6 + 8 mm 

  • TC-BJ 900....

    Mains supply    230 V | 50 Hz Power    860 W Idle speed    11000 min^-1 Groove cutter    100 mm x 22 mm x 3.8 mm Max. router depth    14 mm Tilt angle adjustment    90 ° 

  • RT-RO 55.J...

    Mains supply    230 V | 50 Hz Power    1200 W Idle speed    11000 min^-1 - 30000 min^-1 Stroke height    55 mm Clamping device    6 + 8 mm Moulding cutter max.    30 mm

  • BT-RO 1100...

    Mains supply    230-240 V | 50 Hz Power    1100 W Idle speed    11000 min^-1 - 30000 min^-1 Stroke height    55 mm Collets    6 + 8 mm 

  • BT-MA 1300...

    Mains supply    230 V | 50 Hz Power    1320 W Idle speed    9000 min^-1 Cutting disc    125 mm x 22.2 mm Groove depth    8 mm - 30 mm Groove width    8 mm - 26 mm 

  • TC-BS 8038..

    Mains supply    230 V | 50 Hz Power    800 W Idle speed    380 m/min Sanding belt    76 mm x 533 mm Sanding area    76x142 mm 

  • RT-XS 28.J...

    Mains supply    230 V | 50 Hz Power    280 W Oscillating speed    0-10000 min^-1 Oscillating circuit    2 mm Eccentric sanding area    125 mm Orbital sanding area    140 mm x 115 mm Delta sanding area    174 mm x 174 mm x 105 mm

  • RT-OS 30.J...

    Mains supply    230 V | 50 Hz Power    300 W Oscillating speed    14000 - 22000 min^-1 Oscillating circuit    2 mm Sandpaper size (clamp connection)    280 mm x 115 mm Sandpaper size (velcro strip)    230 mm x 115 mm

  • RT-OS 13 K...

    Mains supply    230 V | 50 Hz Power    130 W Oscillating speed    24000 min^-1 Oscillating circuit    2 mm Delta sanding area    150 mm x 150 mm x 100 mm 

  • BT-RS 420...

    Mains supply    230 V | 50 Hz Power    420 W Oscillating speed    6000 - 13000 min^-1 Oscillating circuit    2 mm Grinding disc diameter    125 mm 

  • BT-OS 280...

    Mains supply    230 V | 50 Hz Power    280 W Oscillating speed    0-12000 min^-1 Oscillating circuit    2 mm Sanding area    227 x 115 mm Sandpaper size (clamp connection)    280 mm x 115 mm Sandpaper size (velcro strip)    230 mm x 115 mm 

  • BT-OS 150....

    Mains supply    230 V | 50 Hz Power    150 W Oscillating speed    23000 min^-1 Oscillating circuit    2 mm Sanding area    90 x 187 mm Sandpaper size (clamp connection)    230 mm x 93 mm 

  • BT-MG 1351...

    Mains supply    230 V | 50 Hz Power    135 W Idle speed    10000 min^-1 - 35000 min^-1 

  • BT-DS 180....

    Mains supply    230 V | 50 Hz Power    180 W Oscillating speed    20000 min^-1 Oscillating circuit    1.2 mm Sandpaper size    90 mm x 90 mm x 90 mm 

  • BT-BS 8501...

      Mains supply    230 V | 50 Hz Power    850 W Idle speed    0 m/min - 380 m/min Sanding belt    76 mm x 533 mm Sanding area    76x142 mm

  • TC-AG 125....

    Mains supply    230 V | 50 Hz Power    850 W Idle speed    11000 min^-1 Disc diameter    125 mm 

  • TC-AG 115....

    Mains supply    230 V | 50 Hz Power    500 W Idle speed    12000 min^-1 Disc diameter    115 mm 

  • RT-AG 230....

    Mains supply    230 V | 50 Hz Power    2300 W Idle speed    6600 min^-1 Disc diameter    230 mm 

  • RT-AG 1251...

    Mains supply    230 V | 50 Hz Power    1010 W Idle speed    12000 min^-1 Disc diameter    125 mm 

  • RT-AG 115....

    Mains supply    230 V | 50 Hz Power    600 W Idle speed    12000 min^-1 Disc diameter    115 mm 

  • BT-AG 850....

    Mains supply    230 V | 50 Hz Power    850 W Idle speed    11000 min^-1 Disc diameter    125 mm 

  • BT-AG 500...

    Mains supply    230 V | 50 Hz Power    500 W Idle speed    11000 min^-1 Disc diameter    115 mm 

  • BT-AG 2350...

    Mains supply    230 V | 50 Hz Power    2350 W Idle speed    6000 min^-1 Disc diameter    230 mm 

  • BT-AG 2000...

    Mains supply    230 V | 50 Hz Power    2000 W Idle speed    6000 min^-1 Disc diameter    230 mm 

  • BT-AG 1000...

    Mains supply    230 V | 50 Hz Power    1010 W Idle speed    11000 min^-1 Disc diameter    125 mm 

  • TH-JS 85

    Mains supply 230 V | 50 HzPower 620 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 85 mmCutting depth in plastic 12 mmCutting depth in steel 8 mmMax. bevel cuts 45 °

  • TH-CS 12001

    Mains supply 230 V | 50 HzPower 1230 WIdle speed 5000 min^-1Saw blade 160 mm x 16 mmNumber of saw teeth 24 PiecesCutting depth at 45° 37 mmCutting depth at 90° 55 mm

  • TE-XC 1101

    Mains supply 230 V | 50 HzPower 730 WIdle speed 4300 min^-1Saw blade 110 mm x 22.2 mmNumber of saw teeth 24 PiecesDiamond cutting disc 110 mm x 22.2 mmCutting depth at 90° 33 mm

  • TE-JS 100

    Mains supply 230 V | 50 HzPower 750 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 23 mmCutting depth in wood 100 mmCutting depth in plastic 12 mmCutting depth in steel 10 mmMax. bevel cuts 45 °

  • TE-JS 18 Li - Solo

    Number of strokes 2400 min^-1Stroke height 25.4 mmCutting depth in wood 80 mmCutting depth in plastic 12 mmCutting depth in steel 10 mmMax. bevel cuts 47 °Toolless saw blade change yes

  • TE-CS 190

    Mains supply 230 V | 50 HzPower 1500 WIdle speed 5500 min^-1Saw blade 190 mm x 30 mmNumber of saw teeth 24 PiecesCutting depth at 45° 48 mmCutting depth at 90° 66 mm

  • TE-CS 165

    Mains supply 230 V | 50 HzPower 1200 WIdle speed 5500 min^-1Saw blade 165 mm x 16 mmNumber of saw teeth 24 PiecesCutting depth at 45° 40 mmCutting depth at 90° 55 mm

  • TE-AP 1050 E

    Mains supply 230 V | 50 HzPower 1050 WNumber of strokes 0 min^-1 - 2700 min^-1Stroke height 29 mmCutting depth in wood 200 mmCutting depth in steel 20 mm

  • TE-AP 18 Li - Solo

    Number of strokes 0 min^-1 - 2600 min^-1Stroke height 22 mmCutting depth in wood 100 mmCutting depth in steel 6 mmToolless saw blade change yes

  • TC-JS 80

    Mains supply 230 V | 50 HzPower 600 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 18 mmCutting depth in wood 80 mmCutting depth in plastic 20 mmCutting depth in steel 10 mmMax. bevel cuts 45 °

  • TC-JS 60

    Mains supply 230 V | 50 HzPower 410 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 18 mmCutting depth in wood 60 mmCutting depth in plastic 10 mmCutting depth in steel 6 mmMax. bevel cuts 45 °

  • TC-CS 1400

    Mains supply 230 V | 50 HzPower 1400 WIdle speed 5200 min^-1Saw blade 190 mm x 30 mmNumber of saw teeth 24 PiecesCutting depth at 45° 45 mmCutting depth at 90° 66 mm

  • TC-CS 860 Kit

    Mains supply 230-240 V | 50 HzPower 450 WIdle speed 6000 min^-1Saw blade bore 10 mmCutting depth 23 mm

  • TC-AP 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 150 mmCutting depth in steel 10 mm

  • RT-JS 85

    Mains supply 230 V | 50 HzPower 750 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 23 mmCutting depth in wood 85 mmCutting depth in plastic 12 mmCutting depth in steel 8 mmMax. bevel cuts 45 °

  • BT-JS 800 E

    Mains supply 230 V | 50 HzPower 800 WNumber of strokes 0 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 80 mmCutting depth in plastic 25 mmCutting depth in steel 10 mmMax. bevel cuts 45 °

  • TC-AP 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 150 mmCutting depth in steel 10 mm

  • RT-JS 85

    Mains supply 230 V | 50 HzPower 750 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 23 mmCutting depth in wood 85 mmCutting depth in plastic 12 mmCutting depth in steel 8 mmMax. bevel cuts 45 °

  • TC-AP 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 150 mmCutting depth in steel 10 mm

  • RT-JS 85

    Mains supply 230 V | 50 HzPower 750 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 23 mmCutting depth in wood 85 mmCutting depth in plastic 12 mmCutting depth in steel 8 mmMax. bevel cuts 45 °

  • BT-JS 800 E

    Mains supply 230 V | 50 HzPower 800 WNumber of strokes 0 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 80 mmCutting depth in plastic 25 mmCutting depth in steel 10 mmMax. bevel cuts 45 °

  • TC-AP 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 150 mmCutting depth in steel 10 mm

  • RT-JS 85

    Mains supply 230 V | 50 HzPower 750 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 23 mmCutting depth in wood 85 mmCutting depth in plastic 12 mmCutting depth in steel 8 mmMax. bevel cuts 45 °

  • BT-JS 800 E

    Mains supply 230 V | 50 HzPower 800 WNumber of strokes 0 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 80 mmCutting depth in plastic 25 mmCutting depth in steel 10 mmMax. bevel cuts 45 °

  • BT-JS 650 E

    Mains supply 230 V | 50 HzPower 650 WNumber of strokes 800 min^-1 - 3000 min^-1Stroke height 18 mmCutting depth in wood 80 mmCutting depth in plastic 20 mmCutting depth in steel 10 mmMax. bevel cuts 45 °

  • BT-JS 400 E

    Mains supply 230 V | 50 HzPower 400 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 18 mmCutting depth in wood 55 mmCutting depth in plastic 10 mmCutting depth in steel 6 mmMax. bevel cuts 45 °

  • BT-CS 14001

    Mains supply 230 V | 50 HzPower 1400 WIdle speed 5200 min^-1Saw blade 190 mm x 30 mmNumber of saw teeth 24 PiecesCutting depth at 45° 45 mmCutting depth at 90° 66 mm

  • BT-CS 12001

    Mains supply 230 V | 50 HzPower 1200 WIdle speed 5000 min^-1Saw blade 160 mm x 16 mmNumber of saw teeth 24 PiecesCutting depth at 45° 37 mmCutting depth at 90° 55 mm

  • BT-CS 860 Kit

    Mains supply 230-240 V | 50 HzPower 450 WIdle speed 6000 min^-1Saw blade bore 10 mmCutting depth 2.3 cm

  • BT-AP 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of strokes 500 min^-1 - 3000 min^-1Stroke height 20 mmCutting depth in wood 150 mmCutting depth in steel 10 mm

  • TH-RH 9001

    Mains supply 220-240 V | 50 HzPower 900 WIdle speed 850 min^-1Impact rate 4100 min^-1Impact power 3 JTool holder SDS plusDrilling capacity in concrete 26 mm

  • TH-RH 1600

    Mains supply 230-240 V | 50 HzPower 1600 WIdle speed 800 min^-1Impact rate 3900 min^-1Impact power 4 JTool holder SDS plusDrilling capacity in concrete 32 mm

  • TE-RH 38 E

    Mains supply 220-240 V | 50 HzPower 1050 WIdle speed 0-500 min^-1Impact rate 0-4100 min^-1Impact power 9 JTool holder SDS MaxDrilling capacity in concrete 38 mm

  • TE-RH 32 E

    Mains supply 230 V | 50 HzPower 1250 WIdle speed 0-850 min^-1Impact rate 0-4100 min^-1Impact power 5 JTool holder SDS plusDrilling capacity in concrete 32 mm

  • TE-HD 18 Li Kit

    Accumulator 18 V | 1500 mAh | Li-IonCharging time 1/2hIdle speed (gear 1) 0-1100 min^-1Impact rate (gear 1) 0-5700 min^-1Impact power 1.2 JMax. torque hard 9.9 NmDrilling capacity in concrete 12 mm

  • TE-HD 18 Li - Solo

    Accumulator 18 V | 1500 mAh | Li-IonCharging time 1/2hIdle speed (gear 1) 0-1100 min^-1Impact rate (gear 1) 0-5700 min^-1Impact power 1.2 JMax. torque hard 9.9 NmDrilling capacity in concrete 12 mm

  • TE-DH 1027

    Mains supply 230-240 V | 50 HzPower 1500 WImpact rate 1900 min^-1Impact power 32 JPower cord 400 cm | H07RN-FTool holder SDS Max

  • TC-RH 900 Kit

    Mains supply 220-240 V | 50 HzPower 900 WIdle speed 850 min^-1Impact rate 4100 min^-1Impact power 3 JTool holder SDS plusDrilling capacity in concrete 26 mm

  • TC-RH 800 E

    Mains supply 230-240 V | 50 HzPower 800 WIdle speed 0-1000 min^-1Impact rate 0-5180 min^-1Impact power 2.5 JTool holder SDS plusDrilling capacity in concrete 26 mm

  • RT-RH 201

    Mains supply 220-240 V | 50 HzPower 500 WIdle speed 0-1200 min^-1Impact rate 0-5800 min^-1Impact power 1.6 JTool holder SDS plusDrilling capacity in concrete 20 mm

  • RT-RH 32

    Mains supply 230 V | 50 HzPower 1250 WIdle speed 800 min^-1Impact rate 4300 min^-1Impact power 3.5 JTool holder SDS plusDrilling capacity in concrete 32 mm

  • RT-RH 32 Kit

    Mains supply 230 V | 50 HzPower 1250 WIdle speed 800 min^-1Impact rate 4300 min^-1Impact power 3.5 JTool holder SDS plusDrilling capacity in concrete 32 mm

  • RT-RH 20

    Length 380 mmWidth 118 mmHeight 365 mmGross weight single packaging 4.5 kgProduct weight 2.8 kg

  • BT-RH 9001

    Mains supply 220-240 V | 50 HzPower 900 WIdle speed 850 min^-1Impact rate 4100 min^-1Impact power 3 JTool holder SDS plusDrilling capacity in concrete 26 mm

  • BT-RH 1600

    Mains supply 230-240 V | 50 HzPower 1600 WIdle speed 800 min^-1Impact rate 3900 min^-1Impact power 4 JTool holder SDS plusDrilling capacity in concrete 32 mm

  • BT-RH 1500

    Mains supply 230 V | 50 HzPower 1500 WIdle speed 800 min^-1Impact rate 3900 min^-1Impact power 4 JTool holder SDS plusDrilling capacity in concrete 32 mm

  • BT-DH 16001

    Mains supply 230 V | 50 HzPower 1600 WImpact rate 1800 min^-1Impact power 43 JPower cord 300 cm | H07RN-FTool holder SDS-HEX 30 mm

  • TH-CD 24-2 i

    Accumulator 24 V | 1200 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 48 NmNumber of torque steps 20 settingsDrill chuck 13 mm | double sleeveDrilling capacity in concrete 10 m

  • TH-CD 18-2

    Accumulator 18 V | 1200 mAh | NiCdCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 30 NmNumber of torque steps 20 settingsDrill chuck 10 mm | double sleeve

  • TH-CD 18-2 Li

    Accumulator 18 V | 1300 mAh | Li-IonCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1150 min^-1Max. torque hard 40 NmNumber of torque steps 20 settingsDrill chuck 10 mm | single sleeve

  • TH-CD 14,4-2 2B Li

    Accumulator 14.4 V | 1300 mAh | Li-IonCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1150 min^-1Max. torque hard 33 NmNumber of torque steps 20 settingsDrill chuck 10 mm | single sleeve

  • TH-CD 12

    Accumulator 12 V | 1100 mAh | NiCdCharging time 3-5hNumber of gears 1Idle speed (gear 1) 0-550 min^-1Max. torque hard 12 NmNumber of torque steps 20 settingsDrill chuck 10 mm | double sleeve

  • TH-CD 12-2 Li Kit

    Accumulator 12 V | 1300 mAh | Li-IonCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1300 min^-1Max. torque hard 24 NmNumber of torque steps 20 settingsDrill chuck 10 mm | single sleeve

  • TH-CD 12-2 Li

    Accumulator 12 V | 1300 mAh | Li-IonCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1300 min^-1Max. torque hard 24 NmNumber of torque steps 20 settingsDrill chuck 10 mm | single sleeve

  • TE-SD 3,6 Li Kit

    Accumulator 3.6 V | 1500 mAh | Li-IonCharging time 3hIdle speed 200 min^-1Max. torque hard 3.5 NmNumber of torque steps 7 settingsTool holder Bit holder (6,35mm/¼") | Mechanic locking sleeve

  • TC-SD 3,6 Li

    Accumulator 3.6 V | 1300 mAh | Li-IonCharging time 3-5hIdle speed 200 min^-1Max. torque hard 3 NmTool holder Bit holder (6,35mm/¼") | Magnetic

  • TC-CD 18-2 Li (2x1,3 Ah)

    Accumulator 18 V | 1300 mAh | Li-IonCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1250 min^-1Max. torque hard 38 NmNumber of torque steps 19 settingsDrill chuck 10 mm | single sleeve

  • TC-CD 18-2 i

    Accumulator 18 V | 1200 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 0-300 min^-1Idle speed (gear 2) 0-900 min^-1Max. torque hard 30 NmNumber of torque steps 21 settingsDrill chuck 13 mm | double sleeveDrilling capacity in concrete 8 mm

  • TC-CD 18-2 2B

    Accumulator 18 V | 1200 mAh | NiCdCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 30 NmNumber of torque steps 20 settingsDrill chuck 10 mm | double sleeve

  • TC-CD 18-2 1h

    Accumulator 18 V | 1200 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 30 NmNumber of torque steps 20 settingsDrill chuck 10 mm | double sleeve

  • TC-CD 14,4 2B

    Accumulator 14.4 V | 1200 mAh | NiCdCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 24 NmNumber of torque steps 20 settingsDrill chuck 10 mm | double sleeve

  • TC-CD 12-2

    Accumulator 12 V | 1100 mAh | NiCdCharging time 3-5hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 14 NmNumber of torque steps 20 settingsDrill chuck 10 mm | double sleeve

  • TC-CD 12 Li

    Accumulator 12 V | 1.3 Ah | Li-IonCharging time 1hNumber of gears 2Idle speed (gear 1) 0-300 min^-1Idle speed (gear 2) 0-1050 min^-1Max. torque hard 20 NmNumber of torque steps 18 settingsDrill chuck 10 mm | single sleeve

  • RT-CD 181

    Accumulator 18 V | 1500 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 0-320 min^-1Idle speed (gear 2) 0-1350 min^-1Max. torque hard 44 NmNumber of torque steps 24 settingsDrill chuck 10 mm | single sleeve

  • RT-CD 14,41

    Accumulator 14.4 V | 1500 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 0-310 min^-1Idle speed (gear 2) 0-1300 min^-1Max. torque hard 36 NmNumber of torque steps 24 settingsDrill chuck 10 mm | single sleeve

  • RT-CD 14,41 Li

    Accumulator 14.4 V | 1300 mAh | Li-IonCharging time 1hNumber of gears 2Idle speed (gear 1) 0-310 min^-1Idle speed (gear 2) 0-1300 min^-1Max. torque hard 38 NmNumber of torque steps 24 settingsDrill chuck 10 mm | single sleeve

  • BT-SD 4,8 F

    Accumulator 4.8 V | 600 mAh | NiCdCharging time 3-5hIdle speed 200 min^-1Tool holder Bit holder (6,35mm/¼") | Magnetic

  • BT-SD 3,61 Li

    Accumulator 3.6 V | 1300 mAh | Li-IonCharging time 3-5hIdle speed 200 min^-1Max. torque hard 3 NmNumber of torque steps 9 settingsTool holder Bit holder (6,35mm/¼") | Mechanic locking sleeve

  • BT-CD 241 i

    Accumulator 24 V | 1200 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 0-350 min^-1Idle speed (gear 2) 0-1100 min^-1Max. torque hard 48 NmNumber of torque steps 20 settingsDrill chuck 13 mm | double sleeveDrilling capacity in concrete 10 mm

  • BT-CD 18

    Accumulator 18 V | 1300 mAh | NiCdCharging time 3-5hNumber of gears 1Idle speed (gear 1) 0-550 min^-1Max. torque hard 9 NmNumber of torque steps 22 settingsDrill chuck 10 mm | double sleeve

  • BT-CD 18 2B

    Accumulator 18 V | 1300 mAh | NiCdCharging time 3-5hNumber of gears 1Idle speed (gear 1) 0-550 min^-1Max. torque hard 9 NmNumber of torque steps 22 settingsDrill chuck 10 mm | double sleeve

  • BT-CD 18 1h

    Accumulator 18 V | 1300 mAh | NiCdCharging time 1hNumber of gears 2Idle speed (gear 1) 350 min^-1Idle speed (gear 2) 1100 min^-1Max. torque hard 9 NmNumber of torque steps 22 settingsDrill chuck 10 mm | double sleeve

  • BT-CD 14,4 2B

    Accumulator 14.4 V | 1300 mAh | NiCdCharging time 3-5hNumber of gears 1Idle speed (gear 1) 0-550 min^-1Max. torque hard 7.5 NmNumber of torque steps 22 settingsDrill chuck 10 mm | double sleeve

  • BT-CD 10,83 Li

    Accumulator 10.8 V | 1300 mAh | Li-IonCharging time 3-5hNumber of gears 2Idle speed (gear 1) 350 min^-1Idle speed (gear 2) 1200 min^-1Max. torque hard 14 NmNumber of torque steps 20 settingsDrill chuck 10 mm | single sleeve

  • BT-CD 10,81 Li Kit

    DC voltage 10.8 VAccumulator 10.8 V | 1400 mAh | Li-IonCharging time 3-5hNumber of gears 1Idle speed (gear 1) 0-600 min^-1Number of torque steps 16 settingsDrill chuck 10 mm | single sleeve

  • TH-ID 7201 E

    Mains supply 230-240 V | 50 HzPower 720 WNumber of gears 1Idle speed (gear 1) 0-2700 min^-1Impact rate (gear 1) 0-43200 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 30 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • TH-ID 1000 Kit

    Mains supply 230 V | 50 HzPower 1010 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 32 mmmDrilling capacity in metal 13 mmmDrilling capacity in concrete 16 mm

  • TH-ID 1000 E

    Mains supply 230 V | 50 HzPower 1010 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 32 mmmDrilling capacity in metal 13 mmmDrilling capacity in concrete 16 mm

  • TH-ID 1000 E

    Mains supply 230 V | 50 HzPower 1010 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 32 mmmDrilling capacity in metal 13 mmmDrilling capacity in concrete 16 mm

  • TE-ID 10501 CE

    Mains supply 230 V | 50 HzPower 1050 WNumber of gears 2Idle speed (gear 1) 0-1000 min^-1Idle speed (gear 2) 0-2800 min^-1Impact rate (gear 1) 0-15000 min^-1Impact rate (gear 2) 0-42000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 40 mmmDrilling capacity in metal 13 mmmDrilling capacity in concrete 16 mm

  • TE-ID 7501 E

    Mains supply 220-240 V | 50-60 HzPower 750 WNumber of gears 1Idle speed (gear 1) 0-2700 min^-1Impact rate (gear 1) 0-43200 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 30 mmDrilling capacity in metal 12 mmDrilling capacity in concrete 14 mm

  • TE-ID 1050 CE

    Mains supply 230 V | 50 HzPower 1050 WNumber of gears 2Idle speed (gear 1) 0-1000 min^-1Idle speed (gear 2) 0-2800 min^-1Impact rate (gear 1) 0-15000 min^-1Impact rate (gear 2) 0-42000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 40 mmmDrilling capacity in metal 13 mmmDrilling capacity in concrete 16 mm

  • TE-ID 750 E

    Mains supply 220-240 V | 50-60 HzPower 750 WNumber of gears 1Idle speed (gear 1) 0-2700 min^-1Impact rate (gear 1) 0-43200 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 30 mmDrilling capacity in metal 12 mmDrilling capacity in concrete 14 mm 

  • TE-ID 500 E

    Mains supply 220-240 V | 50/60 HzPower 550 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmDrilling capacity in metal 8 mmDrilling capacity in concrete 10 mm

  • TC-ID 710 E

    Mains supply 230 V | 50 HzPower 710 WNumber of gears 1Idle speed (gear 1) 0-2700 min^-1Impact rate (gear 1) 0 - 43200 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • TC-ID 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • TC-ID 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • TC-ID 650 E

    Mains supply 230-240 V | 50 HzPower 650 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • RT-ID 651

    Mains supply 230-240 V | 50 HzPower 650 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 0-48000 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • BT-ID 1000 E

    Mains supply 230 V | 50 HzPower 1010 WNumber of gears 1Idle speed (gear 1) 0-3000 min^-1Impact rate (gear 1) 48000 min^-1Drill chuck 0 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • BT-ID 550 E

    Mains supply 230-240 V | 50 HzPower 720 WNumber of gears 1Idle speed (gear 1) 2700 min^-1Impact rate (gear 1) 43200 min^-1Drill chuck 0 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm

  • Veglat

    Mains supply 230 V | 50 HzPower 550 WNumber of gears 1Idle speed (gear 1) 0-2700 min^-1Impact rate (gear 1) 43200 min^-1Drill chuck 1.5 mm - 13 mmDrilling capacity in wood 25 mmmDrilling capacity in metal 10 mmmDrilling capacity in concrete 13 mm